RPI

Power Switch for Gendex GXS016 GX-770 POWER SWITCHRocker switch (On/Off)15A @ 125VAC, DPSTWhite body with illuminated amber lens1/4" tabsPanel cutout: .830" x 1.450"Fits: Control Panel 

BRUSH CLAY ADAMS® (BECTON DICKINSON) 2 per package Size: 1/4 x 1/4 x 3/4 Radius: 1.0 Spring Length: 7/8 For a handy guide regarding Centrifuge Motors, Click here Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAB018

BRUSH CLAY ADAMS® (BECTON DICKINSON) 2 per package Size: 3/16 x 3/16 x 5/8 Radius: 3/4" Spring Length: 5/8" Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAB021

BRACKET (BULB SUPPORT) CHATTANOOGA Material: Stainless steel See Notes below Fits: Attaches the Thermostat and Overheat Thermostat Capillary Bulbs to the Heating Element Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CHB018

FILTER ELEMENT Size: ~1.53" OD x 2.70" lg. 35 micron filter Includes: Filter element, (1 pc) Bowl O-Ring (RPI Part #RPO829), mounting collar with O-Rings, and PM Sticker Also available: Filter Element (Top) (RPI Part #CME103) Fits: Bottom of the...

FILTER ELEMENT Size: ~1.12" OD x 2.74" lg. 2 micron paper filter Includes: Filter element, inner O-Ring, (1 pc) Bowl O-Ring (RPI Part #RPO830), and PM Sticker Also available: Filter Element (Bottom) (RPI Part #CME102) Fits: Top Membrane Dryer Assembly...

UNLOADER VALVE Right angle quick exhaust valve with (2) 1/4" FPT ports and (1) 3/8" FPT exhaust port Port size: 1/4" FPT x 1/4" FPT x 3/8" FPT Material: Aluminum body and Buna N diaphragm Includes: Unloader Valve, Adaptor (RPI...

BOWL GASKET 3 per package Material: Buna N (Nitrile) Size: 2.23" OD x .13" Square Included in: Solids Collector (3/4") (RPI Part #VPC069) and Solids Collector Replacement Kit (RPI Part #VPK072) Fits: Solids Collector Assembly (3/4") Model(s) This Part Fits:...

ANTI-SYPHON VALVE REPAIR KIT Includes all parts as shown Material: Silicone seal Used to repair the Apollo brand Anti-Syphon Valve (1/4" & 3/8") Only For Watts brand Anti-Syphon Valve Repair Kit, use RPI Part #VPK016 When servicing the anti-syphon valve,...

HEPA Filter for Tuttnauer RPF644 Tuttnauer Hepa Filter, 2.5" lg., Accomodates tubing with ID of 1/4"-3/8", For use with air or gasses only, Includes (1 pc) Cable Tie (12" Black), Fits Model(S):2340EA, 2340EKA, 2540EA, 2540EHS, 2540EKA, 3870EA, 3870EHS, Delta 10"...

WATER VALVE ACTUATOR 3 per package Material: Plastic Also Included in: Control Block Service Kit Also available: Control Block Service Kit (Major)

SWITCH ASSY (PADDLES LT) A-DEC Left side only, pre-position 3 black paddle switches For right side use Switch Assy (Paddles RT) (RPI Part #ADA214) See Notes below for serial numbers this part fits Fits: Backrest Assembly (left side only) Model(s)...

SWITCH ASSY (PADDLES RT) A-DEC Right side only, auto return 3 black paddle switches For left side use Switch Assy (Paddles LT) (RPI Part #ADA213) See Notes below for serial numbers this part fits Fits: Backrest Assy (right side only)...

SWITCH ASSY (ROCKERS RT) A-DEC Right side only, auto return White rocker switches Includes Switch (Push-Button) (RPI Part #ADS224) For left side use Switch Assy (Rockers LT) (RPI Part #ADA216) See Notes below for serial numbers this part fits Fits:...

SWITCH ASSY (ROCKERS LT) A-DEC Left side only, pre-position White rocker switches Includes Switch (Push-Button) (RPI Part #ADS224) For right side use Switch Assy (Rockers RT) (RPI Part #ADA215) See Notes below for serial numbers this part fits Fits: Backrest...

SWITCH ASSY (TILT LIMIT) A-DEC Includes all parts as shown, including (3) Limit Switch (Modified) (RPI Part #ADS211) Also available Main Cable Assembly (RPI PART #ADK208) See Notes below for serial numbers this part fits Fits: Chair Seat Assembly Model(s)...

BARB A-DEC 10 per package Material: Nickle plated brass Size: 1/8" barb to #10-32 male thread Fits: 1/8" ID tubing Fits: Reservoir Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB011

BARB 10 per package Material: Nickle plated brass Size: 1/16" barb to #10-32 male thread Fits: 1/16" ID tubing Fits: Control Block 300 & 500 series, Foot Control Signal Relay Main Body Valve, and Water Coolant Relay Assembly (A-dec Part...

BARB TEE 10 per package 1/16" Barb Tee Material: Nylon® Fits: 1/16" ID Tubing Included in: Barb Kit (RPI Part #ADK080) Fits: 1/16" ID Tubing Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB013

CIRCUIT BOARD ('A' BOX ) A-DEC RPI added jumper system for LK 1 to disable the pre-position functions RPI added header system to the test points for easy testing of chair functions Fits: 'A' Box Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB203

CIRCUIT BOARD ('B' BOX) A-DEC 100/120 VAC Includes Fuse (0.6A, 250V) (RPI Part #RPF737) Fits: "B" BOX Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB219

BEARING SLEEVE Material: Nickel plated brass Size: .820" ID x .872" OD x .380" lg. Also included in: Pivot Tension Kit (RPI Part #ADK258) Fits: Yoke Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB260

BUSHING (RIGHT) Material: White plastic Size: .812" OD x .490" ID x .202" Thk Also included in: Pivot Tension Kit (RPI Part #ADK258) Fits: Yoke Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB263

BUSHING (LEFT) Material: White plastic sleeve & brass bushing Also included in: Pivot Tension Kit (RPI Part #ADK258) Fits: Yoke Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADB268

UNI-CLAMP 20 per package Material: Plastic Fits: 1/8" OD Tubing with 1/16" Barb Fits: Control Block 300 & 500 series, Handpiece Block to fit Century II System (OEM Part #38-0223-00), & Handpiece Block to fit Century Plus System Model(s) This...

SLEEVE CLAMP (1/4") A-DEC, DENTSPLY 20 per package Material: Plastic See Notes below: Fits: 1/4" OD Tubing with 1/8" Barb Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC035

CORD CLIP 10 per package 3/8" bundle size Natural Nylon® with adhesive backing Meets UL94V-2 Flame Class Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC058

TILT CYLINDER KIT A-DEC 1.88" OD x 12.18" O/A Lg (retracted) Includes cylinder, (2) 1/4-20 x 1/2” LG Stainless steel socket head cap screw and Thread-locker 242 (RPI Part #RPA032) Uses Hydraulic fluid (RPI Part #RPF449) Fits: Link Assembly Model(s)...

CABLE ASSY (MAIN) A-DEC Overall Length: ~68" See Serial Numbers Below See Notes below for parts included in this Kit Fits: Connects Chair Top, Chair Seat and Chair Base Assemblies Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC207

CABLE ASSY (CTRL SWITCHES) A-DEC Overall length: ~24" See Notes below for Serial #'s this part fits Fits: Chair Back Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC205

CABLE ASSY (LIFT LIMIT) A-DEC Overall length: ~18.25" See Notes below for Serial #'s this part fits Fits: Base Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC206

CABLE (PRE-POSITION BASE) A-DEC Overall Length: ~12.50" See Notes below for Serial #'s this part fits Fits: Connects the Main Cable to Lift Pre-Position Assembly (OEM Part #61.0593.00) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC209

CABLE ASSY (STOP PLATE) A-DEC Overall Length: ~23.50" See Notes below for Serial #'s this part fits Fits: Base Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC210

BRAKE CABLE A-DEC ~25.31" Long; Clear Nylon® Jacket Stainless steel cable and fittings Includes: Brake Cable and Hex Nut (RPI Part #RPH727) Also available: Mount (Brake Cable) (RPI Part #ADM225) See Notes below for Serial #'s this part fits Fits:...

GROUND CONTACT Material: Copper Also included in: Pivot Tension Kit (RPI Part #ADK258) Fits: Yoke Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADC267

HOSE ASSY (TILT CYLINDER) A-DEC Length: ~44.00" Fittings: 7/16-20 Flare Female x 7/16-20 Flare 90° Elbow See Notes below for Serial #'s this part fits Also Available, Cable Tie (4" White) (RPI Part #RPT083) and Hydraulic Fluid (RPI Part #RPF449)...

HOSE ASSY (LIFT CYLINDER) A-DEC Length: ~10.00" Fittings: 7/16-20 Flare Female x 7/16-20 Flare 90° Elbow See Notes below for Serial #'s this part fits Also Available, Cable Tie (4" White) (RPI Part #RPT083) and Hydraulic Fluid (RPI Part #RPF449)...

BARB KIT Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADK080

SOCKET HEAD CAP SCREW KIT Hardware Material: Stainless Steel All parts also sold separately! Kit includes 12-Compartment Storage Case (RPI Part #RPB416) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADK110

CABLE ASSY (MAIN COMPLETE) A-DEC Overall Length: 70.50" See Serial Numbers Below See Notes below for parts included in this Kit Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=ADK208

SOLENOID VALVE REPAIR KIT For 3/8" port valves ETFE Seals Includes all parts as shown Fits: S-2 Valves