Autoclaves & Sterilizers

Power Switch for Gendex GXS016 GX-770 POWER SWITCHRocker switch (On/Off)15A @ 125VAC, DPSTWhite body with illuminated amber lens1/4" tabsPanel cutout: .830" x 1.450"Fits: Control Panel 

AIR VENT BELLOWS ASSEMBLY 1/4" compression fittings- both ends Material: Bronze diaphragm style; Stainless steel housing Mounts to tubing between temperature gauge and reservoir Actuates within 12°F of saturated steam temperature Fits: Chamber to Condesning Tank (older style units) Model(s)...

DOOR GASKET Size: 11.31" OD Material: Red Silicone When replacing this gasket, it is also a good time to replace the Door Spacer (RPI Part #PCS067) Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=PCG066

HEATING ELEMENT 1400W, 120VAC (~10 Ω) Includes: See Notes Below Mounts in water pan Also available: Heater Mounting and Connecting Hardware (RPI Part #NAH009) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=NAH004

DOOR GASKET (QUAD RING) 10.000" OD x .281" sq. C/S Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=NAG001

TEMPERATURE PROBE ASSEMBLY Material: Brass housing 1/8" MPT Size: ~12.00" lg. wire Also available: Temperature Sensor (RPI Part #MIS121) Fits: Rear Chamber Port (older style units) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIP050

DRAIN HOSE KIT 13" drain hose can be cut to fit as needed for older models Fits: Reservoir Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIK061

MID-CLEAN™ Sterilizer cleaning solution (1) 16 oz. bottle Also available: Mid-Clean™ case of 12 bottles (RPI Part #MIC144) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=MIC143

WATER GUARD Just peel and stick for easy installation Included in: Sterilizer PM Kit (RPI Part #AMK234) Fits: Chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMG172

HEPA Filter for Tuttnauer RPF644 Tuttnauer Hepa Filter, 2.5" lg., Accomodates tubing with ID of 1/4"-3/8", For use with air or gasses only, Includes (1 pc) Cable Tie (12" Black), Fits Model(S):2340EA, 2340EKA, 2540EA, 2540EHS, 2540EKA, 3870EA, 3870EHS, Delta 10"...

DOOR GASKET 11.750 O.D” Included in: Sterilizer PM Kit (RPI Part #AMK234) Fits: Door Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=AMG161

TOGGLE SWITCH DPST 6A @ 125VAC Includes push-on terminal, and wire nut Mounts in base of machine Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=SKS001

DRAIN TUBE ASSEMBLY KIT Includes all parts as shown Fitting: Polypropylene; Tubing: Clear PVC (3/8" ID. x 5/8" OD) Fits: Front Panel/Female Quick Connect Fitting - Grey (RPI Part #RPF426) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RPK431

CHAMBER INSULATION Size: 14-1/4" x 28" x 1/4" Thk. White ceramic fiber paper Cut to fit 8" and 9" diameter chambers Fits: Wraps around Chamber of Autoclave Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RPI268

SCREW (#8 x 5/8) 12 per package Material: Stainless steel Size: #8-18 x 5/8" lg. Type Teks Phillips Pan Head Included in: Cover Plate (Printer) (RPI Part #MIC199) Fits: Printer Cover Plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RPH856

SCREW (#10 x 5/8" PHIL PAN HD) 12 per package Material: Stainless steel Size: #10-24 x 5/8" lg. Type F Phillips Pan Head Included in: Top Cover Kit (RPI Part #MIK196) Fits: Steam Block to Top Cover Model(s) This Part...

ELBOW FITTING (45˚ MALE) Material: Brass Size: 3/8" tube X 1/4" MPT Included in: Fill/Vent Manifold Kit (RPI Part #MIK202) Fits: Manifold Assembly Model(s) This Part Fits:

FUSE (12A, 250VAC) - 1/4 X 1-1/4 - FAST ACTING 5 per package 1/4" dia. x 1-1/4" lg. - Fast Acting Material: Ceramic Also available, Fuse Holder ( RPI Part #RPH674 ) Fits: Fuse Holder (RPI Part #RPH674) Model(s) This...

MALE QUICK CONNECT FITTING (GREY) Includes: Fitting and O-ring (RPI Part #RPO304) 3/8” (9.5 mm) hose barb: 0.28” Flow Body material: Polypropylene; Seals material: EPDM Operating temperature: 32°F - 160°F (0°C - 71°C) Working pressure: Vacuum to 105 PSI Fits:...

FEMALE QUICK CONNECT FITTING (GREY) Includes all parts as shown 3/8” (9.5 mm) hose barb: 0.28” Flow Body material: Polypropylene; Seals material: EPDM Bulkhead panel mount hose barb body with quick connect shut-off Operating temperature: 32°F to 160°F (0°C to...

ADHESIVE (RTV108) Size: 2.8 fl. oz. tube Translucent silicone adhesive/sealant Temperature Range: -75˚F to +400˚F Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RPA874

DOOR WASHER .375" ID x .635" OD x .090" THK Material: Copper, Nickle Plated Fits: Door Assembly (T-Bolt) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCW009

SOLENOID VALVE Non-manifold mount; 1/4" orifice, 1/4" FPT; Ports Material: Brass body, Viton seals 120VAC, 50/60Hz. FWR, 14W; 2 way; N.C. Need Repair Kit? (RPI Part #RCK113) Need Coil only? (RPI Part #RCC114) Fits: Mounts on Chassis older style units...

SAFETY RELIEF VALVE Cracking pressure: 45 PSI 1/2" FPT x 1/2" MPT Fits: 1/2" Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCV082

VENT CONTROL VALVE Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCV081

WATER FILL VALVE Includes all parts as shown 1/8 FPT ports Momentary, 2 way N.C. Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCV080

FILL VENT VALVE Material: Brass body; EP seals Includes (x2) 3/8" male connector fittings and "L" Bracket Please see the Tech Talk article Reintroducing the Fill-Vent Valve (RPI Part #RCV052) See Notes below for serial numbers this part fits Fits:...

SAFETY VALVE (31 PSI) Cracking Pressure: 31 PSI Brass; 1/8" MPT Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCV051

TIMER (30 MIN) Includes mounting screws Timer Knob sold separately - see RPI Part #RCK092 or RPI Part #RCK111 The Wire Harness (RPI Part #RCH117) may be needed to extend the length of the original Wire Harness when upgrading to...

STEAM TRAP 1/2" MPT, 1/2" FPT Fits: 1/2" Tee and Elbow Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCT084

MANUAL THERMOSTAT Opens @ 335˚ F; Closes @ 290˚ F Push to reset Fits: Bracket that mounts to under side of chamber Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCT050

TIME SWITCH (60 MIN) 60 Minutes, Bell Alert 20A @ 125VAC / 10A @ 250VAC SPST Shaft: 3/16" dia. x 11/16" lg. Double Flat Size: 1-7/8" x 1-7/8" x 1-1/2" DP Mount: 2 Hole - # 6-32 @ 1-1/8" apart...

FILL/VENT SWITCH Panel cutout: .550" x 1.125" SPST (momentary on) paddle switch 10A @ 125VAC, 5A @ 250VAC 1/4" Tabs Color: Black body with Black paddle Fits: Front Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCS115

DOOR SPRING 5 per package .335" OD x 1.025" length inside hooks, .052" wire dia. Material: Stainless steel Fits: Door Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCS108

VALVE STEM KIT Material: Brass Stem, EP O-rings This Valve Stem accommodates a #10-32 thread and has two different sized O-rings Please see the Tech Talk article Reintroducing the Fill-Vent Valve (RPI Part #RCV052) See Notes below Fits: RPI's new...

VALVE STEM KIT Use this kit to repair the Valve since the complete valve is no longer available When servicing Models 7, M7, 1200 & 1250, this part fits ONLY the OLD STYLE RPI Fill-Vent Valve - Please see the...

SLEEVE 5 per package .125" ID x .312" OD x .220" lg. EPDM; 70 Duro Included in: Temperature Gauge (Dial Thermometer) (RPI Part #RCG085) Fits: Temperature gauge Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCS086

RELAY SWITCH ASSEMBLY Includes all parts as shown Fits: Relay Control Bracket Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=RCS042