Centrifuges & Other Lab Equipment

MECHANICAL TIME SWITCH (30 MINUTE) CLAY ADAMS® (BECTON DICKINSON) 30 Minutes, Bell Alert 20A @ 125VAC / 10A @ 250VAC Shaft: 3/16" dia. x 11/16" lg. Double Flat Size: 1-7/8" x 1-7/8" x 1-1/2" DP Mount: 2 Hole - #...

MOTOR ASSEMBLY CLAY ADAMS® (BECTON DICKINSON) 120VAC, 60 Hz., 10,300 RPM max. Includes motor, collar, and pin When replacing this motor, it is also a good time to replace the Motor Gasket (RPI Part #CAG034) See Notes below for replacement...

BRUSH CLAY ADAMS® (BECTON DICKINSON) 2 per package Size: 3/16 x 3/16 x 5/8 Radius: 3/4" Spring Length: 5/8" Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAB021

BRUSH CLAY ADAMS® (BECTON DICKINSON) 2 per package Size: 1/4 x 1/4 x 3/4 Radius: 1.0 Spring Length: 7/8 For a handy guide regarding Centrifuge Motors, Click here Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=CAB018

LATCH KIT BECKMAN/IRIS IDEXX VT (V901-22) Includes: Latch, latch housing, Membrane Panel (RPI Part #BKP028), (1 pc) Bumper/Foot (RPI Part #RPB896), and mounting hardware Also available: Top Cover Assembly (RPI Part #BKK019) Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BKK020

SAFETY SWITCH ASSEMBLY IDEXX VT (V901-22) 5A@250VAC; SPST Includes: Switch with decoupling capacitor, wire harness with connector, (1 pc) Cable Tie (RPI Part #RPT083), and mounting hardware Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BKA026

POWER SWITCH DPST 6A @ 125VAC; 3A @ 250VDC Fits: Control Panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=BUS030

NYLON WASHER IEC MB Micro-Hematocrit Fits: Head Adapter Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEW003

MECHANICAL TIME SWITCH (15 MINUTE) IEC 15 Minutes, Bell Alert 15A per pole; 120/240VAC; DPDT Shaft: 1/4" dia. x 3/4" lg. "D" Flat Size: 2.00" x 2.00" x 1-3/4" DP Includes: (4) 1/4" Male Tab, Knob, 15 min. Faceplate, Mounting...

ROCKER POWER SWITCH IEC Spinette SPST 115VAC, 16 AMP Fits: Front panel cut-out Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IES045

BRAKE SWITCH IEC MB Micro-Hematocrit SPDT 10A, 125VAC-DC; 1/4 HP, 125VAC-DC Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IES026

BRAKE SWITCH ASSEMBLY IEC MB Micro-Hematocrit DPDT 10A, 125VAC-DC; 1/4 HP, 125VAC-DC Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IES023

MOTOR SHOCK MOUNT ASSEMBLY IEC MB Micro-Hematocrit 3 per package Includes: Rubber isolators, sleeves, and washers Fits: Motor Mounts of Drive Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IES020

RETAINER RING IEC MB Micro-Hematocrit Fits: Head Adapter Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IER005

VENT PLATE IEC Spinette 18 gage perforated stainless steel Includes hardware Fits: Mounting studs in base plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEP046

SPRING LOADED PLUNGER IEC Spinette Fits: Mounting holes in catch bracket Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEP039

HEAD ADAPTOR NUT IEC MB Micro-Hematocrit Fits: Head Adapter Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEN004

MOTOR MOUNT IEC UV 3 per package Fits: Mounting Plate of Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEM017

HEAD ADAPTOR KIT IEC MB Micro-Hematocrit See Notes: below for parts included in this Kit All part also sold separately! Fits: Shaft of Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEK006

FOOT IEC 4 per package Fits: Bottom Plate Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEF022

POWER CORD IEC Spinette6 feet long Includes strain relief bushing 13 AMP Fits: Mounting holes at bottom rear of centrifuge Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEC042

RUBBER CUSHION IEC Size: 3/16 x 1/16 x 25" Fits: Rotor Head Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEC016

CATCH BRACKET ASSEMBLY IEC Spinette Includes (2) screws and mounting plate Fits: Mounting holes in lid Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB040

BRUSH CLAY ADAMS® (BECTON DICKINSON) IEC 2 per package Size: 1/4 x 1/4 x 21/32 Radius: .725 Spring length: 1.0 Copper shunt wire Fits: Motor (RPI Part #CAM049, CAM050 & IEM025) only Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB024

BRUSH IEC 2 per package Size: 3/16 x 3/8 x 1" Radius: ~3/4" Spring length: 1-1/4" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB015

BRUSH IEC 2 per package Size: 1/4 x 3/8 x 27/32" Radius: 1/2" Spring length: 1-1/4" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB014

BRUSH IEC 2 per package Size: 1/4 x 7/16 x 13/16" Radius: 1/2" Spring length: 1-1/8" Copper shunt wire Split brush Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB013

BRUSH IEC B20-A (Late Model) 2 per package Size: 1/4 x 1-1/4 x 1-1/4" Radius: 1-1/8" Bevel: 5 deg. Spring length: 1-5/8" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB012

BRUSH IEC PR-6 2 per package Size: 1/4 x 5/8 x 1-1/8" Radius: 1.0" Spring length: 1-1/2" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB011

BRUSH IEC 2 per package Size: 3/16 x 5/8 x 1-1/16" Radius: 5/8" Bevel: 5 deg. Spring length: 1-1/8" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB010

BRUSH IEC 2 per package Size: 1/4 x 5/8 x 1-1/8" Radius: 1.0" Spring length: 1-3/8" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB009

BRUSH IEC 2 per package Size: 7/32 x 5/16 x 5/8" Radius: 3/8" Spring length: 1.0" Copper shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB008

BRUSH IEC 2 per package Size: 1/4" x 1/4" x 7/8" Radius: 3/8" Spring length: 2-3/16" No shunt wire Fits: Brush Holder Assembly Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEB007

HEAD ADAPTOR ASSEMBLY IEC Includes head adapter, (2) 10-32 x 1/8 stainless steel set screw, and (2) stainless steel pin Fits: Shaft of Motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=IEA001

MECHANICAL TIME SWITCH HAMILTON BELL VanGuard V-6500 60 Minute with hold, Bell Alert 20A @ 125VAC / 10A @ 250VAC SPST Shaft: 3/16" dia. x 11/16" lg. Double Flat Size: 1-7/8" x 1-7/8" x 1-1/2" DP Mount: 2 Hole -...

LID SAFETY SWITCH HAMILTON BELL VanGuard V-6000 6500 125/250VAC, 10 AMP Fits: Mounting holes in rear panel Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=HBS006

POWER MODULE HAMILTON BELL VanGuard V-6000 6500 15A @ 250VAC 1/4" Quick connet Contact Style: .187" tab x .032" (4.7mm x 0.8mm) Fits panel cut-out: .787" x 1.083" (20mm x 27.5mm); .079" dia. (2mm) maximum panel Thk. Fits: Rear Panel...

MOTOR MOUNT HAMILTON BELL VanGuard V-6000 6500 4 per package Black rubber 8-32 internal and external threads Fits: Mounting studs on bottom of motor Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=HBM009

INDICATOR LAMP HAMILTON BELL VanGuard V-6500 Lamp rated @ 125VAC Fits: Front panel cut-out Model(s) This Part Fits: www.rpiparts.com/SearchModelList.aspx?rpinum=HBL004